ZLINK Q3-600 Automated Guided Vehicle

ZLINK Q3-600 overview

The ZLINK Q3-600 is the compact 600 kg rated-load model in the ZL Series of automated guided vehicles. ZLINK describes the family as equipment for warehouse logistics and production line material handling, including wet wipes manufacturing. Within the four-model range, the Q3-600 has the smallest published floor footprint.

Its main selection angle is the relationship between load requirements and available floor space. A project that does not require the higher rated loads of the larger models may assess the Q3-600 for its compact vehicle envelope. This is a comparison of published dimensions, not a guarantee that it will fit a particular route or perform a specified transfer.

Compact vehicle design

Dimensions and handling geometry

The Q3-600 measures 950 mm long, 650 mm wide and 250 mm high. Published machine mass is 130 kg. Those values help establish the starting point for a layout review, but the working envelope must also account for the transported load, any agreed fixture and the clearances required at stations.

The listed turning radius is 498 mm, while minimum right-angle passing width is 1,350 mm. These measurements address different aspects of movement. The smaller turning-radius figure must not be used as the required aisle width, and body width alone cannot establish sufficient space for a loaded right-angle turn.

Navigation and control technology

The model table specifies LSLAM/QR code navigation, differential drive and a touch screen HMI. Published positioning accuracy is ±10 mm and ±1°. The navigation entry provides a basis for discussing route implementation, while the positioning figures help frame the accuracy review for the intended transfer task.

The exact navigation arrangement and station approach should be confirmed during project definition. Where materials must align with a process opening or carrier, compare the required transfer tolerance with the agreed installed performance. The technical data does not by itself establish a complete docking solution or a guaranteed outcome at every station.

Published specifications

The two lifting entries retain the manufacturer's labels. Confirm their reference points using an application drawing before specifying pickup heights or designing a load interface. They should not be added together or substituted for each other without clarification.

Applications and load selection

Potential assignments include defined material transfers between storage, staging and production locations within the manufacturer's stated logistics scope. For a wet wipes production project, evaluate the actual materials and carrier arrangement rather than assuming that the vehicle connects directly to a particular line machine.

The 600 kg rating is the starting capacity criterion. Establish the total transported mass, its distribution and the physical size of the load. A relatively light but wide load can create a route-clearance issue even when its mass is below the published rating. Any carrier or fixture should be included in the compatibility discussion with the supplier.

Integration considerations for constrained layouts

Where floor space is the reason for considering the Q3-600, map the full journey instead of checking only the narrowest straight section. Review corner approaches, transfer areas, doorway alignment and charging access. The published 1,350 mm passing width is a reference for right-angle movement, not an approval of an entire building layout.

Define how work requests will be issued and how operators will handle incomplete transfers or unavailable stations. Compatibility with warehouse software, production controls or a dispatch system is not established by the source. Ask for a project-specific controls description and agreed acceptance checks before treating these connections as available features.

Charging and operating schedule

The Q3-600 battery is specified at 48 V and 24 Ah, with automatic and manual charging. The family FAQ describes 6–8 hours of operation and recharge times of up to 1.5–2 hours depending on model. Those figures should be assessed against the proposed workload rather than used to promise uninterrupted shift coverage.

Pricing and availability

The manufacturer uses configuration-based quotations rather than a published retail price. A useful enquiry should include load details, station heights, route dimensions and the expected working schedule. Confirm what vehicle configuration and project services are included so that quotations can be compared on the same basis.

Availability remains subject to confirmation. The technical listing does not establish current stock, a dispatch date or installation timing. Agree those commercial details separately from the engineering assessment.

Frequently asked questions

What is the Q3-600 rated to carry?

Its published rated load is 600 kg. The proposed load and carrier arrangement still require an application compatibility review.

How compact is the vehicle?

It measures 950 × 650 × 250 mm and has the smallest floor footprint in the published four-model table.

Is 498 mm the required aisle width?

No. That is the turning radius. The listed minimum right-angle passing width is 1,350 mm.

Which navigation and HMI are listed?

The Q3-600 has LSLAM/QR code navigation and a touch screen HMI, with published positioning accuracy of ±10 mm and ±1°.

Can a production software connection be assumed?

No. The available specification does not establish a software interface; confirm the required controls integration in the quotation.

Summary

The ZLINK Q3-600 provides the compact dimensional option in the ZL Series, with a 600 kg rated load and 48 V, 24 Ah battery. Its suitability depends on the complete loaded route, transfer geometry and confirmed integration scope, not compact body dimensions alone.