SIASUN Arc Welding Robotic Solution

The SIASUN arc welding robotic solution is an integrated welding kit built around SIASUN's SR12A-12/1.46 or SR25A-12/2.01 robot, an intelligent welding control system and digital welding equipment. It comes in three process versions, thin plate, medium and thick plate, and ultra-low spatter, and uses an intelligent arc welding process package for a soft, stable arc, low heat input, strong gap bridging and consistent, good looking welds.

متوفر

ماركة:
SIASUN
نموذج:
ARC WELDING ROBOTIC SOLUTION
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-Arc-welding-robotic-solution

SIASUN Arc Welding Robotic Solution

Arc welding is the most common joining process in metal fabrication, and also one of the hardest to keep consistent by hand. Thin sheet burns through easily, thick plate needs deep, steady fusion, and spatter means extra cleaning. The SIASUN arc welding robotic solution addresses each case with a dedicated process version, all built on the same SIASUN SR series robots, welding control and digital welding equipment.

Background

SIASUN is a Chinese robotics and automation company that builds industrial robots, mobile robots and complete production lines, including welding lines. Its welding kits combine a robot with process equipment and software in one package. The arc welding kit system includes three solutions: thin plate, medium and thick plate, and ultra-low spatter. Each is centered on an SR series robot, equipped with an intelligent welding control system and integrated digital welding equipment, in an integrated design that SIASUN says makes welding easier, more precise and more efficient.

Key Specifications

ItemDetails
Process versionsThin plate, medium and thick plate, ultra-low spatter
Robot optionsSIASUN SR12A-12/1.46 or SIASUN SR25A-12/2.01
Welding power sourceAotai MAG-350Pro RII-Plus, as listed by SIASUN
Welding torch optionsLoyee GL350N-HDA, TRM 352P, ARH6350
ControlSIASUN intelligent welding control system
SoftwareIntelligent arc welding process package
RobotPayloadReachRepeatabilityWrist
SR12A-12/1.4612 kg1465 mm±0.03 mmIP65
SR25A-12/2.0112 kg2010 mm±0.07 mmIP65

Equipment can vary by process version and region. Confirm the power source, torch, wire size and plate thickness range for your parts in your quotation.

Features

Three Process Versions

The thin plate version focuses on controlled heat to avoid burn through and distortion. The medium and thick plate version suits structural joints that need solid fusion. The ultra-low spatter version cuts cleaning after welding. You choose the version that matches your parts.

Soft, Stable Arc

SIASUN describes the process as a soft arc with little spatter, good droplet transfer, low heat input and strong gap bridging ability, which helps when part fit up is not perfect.

Consistent, Good Looking Welds

High arc stability and consistent welding give an even, attractive bead profile from part to part.

Application Specific Software

The kit is customized for the application and comes with an intelligent arc welding process software package, so parameters are matched to the job.

Integrated Configuration

Robot, welding control, power source and torch are selected and integrated together, which SIASUN says improves efficiency.

Two Robot Sizes

The SR12A-12/1.46 is SIASUN's arm developed for demanding arc welding, with ±0.03 mm repeatability for compact cells. The SR25A-12/2.01 carries the same 12 kg with 2010 mm of reach for long seams and larger weldments.

Applications

  • Sheet metal fabrication. Enclosures, cabinets and frames in thin steel.
  • Structural fabrication. Brackets, frames and assemblies in medium and thick plate.
  • Automotive parts. Seats, frames, exhaust and chassis components.
  • Machinery and equipment. Weldments where clean, consistent seams reduce rework.

These are typical arc welding uses; confirm your part with a sample weld. See more welding robots, SIASUN industrial robots and factory robots.

Which Should You Buy?

OptionProcessBest for
Arc kit, thin plateArc weldingThin sheet with low distortion
Arc kit, medium and thick plateArc weldingStructural joints in heavier plate
Arc kit, ultra-low spatterArc weldingParts where cleaning time matters
SIASUN laser welding robotic solutionLaser weldingSlim, low distortion seams
SIASUN spot welding solutionResistance spot weldingCar bodies and sheet metal spot welds

To finish seams after welding, see the SIASUN grinding robotic solution.

Before You Buy

  • Define the joints. Share material, thickness, joint types, seam lengths and the required weld standard.
  • Choose the version. Match thin plate, thick plate or low spatter to most of your parts.
  • Check reach. Make sure every seam lies within 1465 mm or 2010 mm, with the torch at the right angle.
  • Plan fixtures and positioners. Good clamping and part access decide weld quality.
  • Plan the cell. Include fume extraction, welding screens, guarding and gas supply.

Pricing and Availability

The SIASUN arc welding robotic solution is supplied on a quotation basis. The final cost depends on the robot, process version, power source, torch, positioners, fixtures, shipping and integration. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your project.

Frequently Asked Questions

What versions of the SIASUN arc welding robotic solution are available?

Three: thin plate, medium and thick plate, and ultra-low spatter.

Which robots does it use?

The SIASUN SR12A-12/1.46 or SR25A-12/2.01.

Which welding equipment is included?

SIASUN lists an Aotai MAG-350Pro RII-Plus power source and Loyee GL350N-HDA, TRM 352P or ARH6350 torches. The final configuration is confirmed in the quotation.

Why choose the ultra-low spatter version?

Less spatter means less cleaning and grinding after welding, and a better looking finish.

Which robot should I choose?

The SR12A-12/1.46 for compact cells and the highest repeatability; the SR25A-12/2.01 for long seams and larger parts.

Where can I buy the SIASUN arc welding robotic solution?

You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.

Summary

The SIASUN arc welding robotic solution combines an SR12A-12/1.46 or SR25A-12/2.01 robot with intelligent welding control, digital welding equipment and an arc process package, in thin plate, medium and thick plate and ultra-low spatter versions. It suits fabricators who want stable, clean, consistent welds from one integrated kit. Request a quote on this page to plan a cell for your parts.

المواصفات

General

ماركة SIASUN
نموذج ARC WELDING ROBOTIC SOLUTION
استخدام الروبوت مصنع, صناعية, لحام

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: SIASUN Arc Welding Robotic Solution
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.