SIASUN GCR3-618-W

The SIASUN GCR3-618-W is the smallest DUCO collaborative welding robot, with a 3 kg payload, 618 mm reach, ±0.02 mm repeatability and IP54/IP65 protection. Graphical programming and drag teaching make it quick to set up, and its standard welding process package covers spot, fillet, weave, reciprocating, cladding and multi-layer, multi-pass welding. Built for bench top cells, very small parts and welding training, it adds an optional external axis plug-in and compatibility with mainstream welding machines.

متوفر

ماركة:
SIASUN
نموذج:
GCR3-618-W
الجزء #:
GCR3-618-W
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-GCR3-618-W

SIASUN GCR3-618-W

Some welds are tiny: terminals, small fittings, sensor housings, jewelry findings, wire frames. They fit inside a shoebox, and a full size welding robot is far more than they need. The SIASUN GCR3-618-W is the smallest welding cobot in SIASUN's DUCO range. With a 3 kg payload, 618 mm reach and ±0.02 mm repeatability, it turns a bench into a robotic welding cell, and welders teach it by hand.

Background

SIASUN is a Chinese robotics and automation company that builds industrial robots, collaborative robots, mobile robots and complete production lines. DUCO is its collaborative robot brand, and the GCR series is its main cobot range. The W versions are welding models with two core functions, graphical interaction and drag teaching, and a standard welding process package. The GCR3-618-W is the smallest of them, below the GCR5-910-W and the GCR10-1300-W.

Key Specifications

SpecificationSIASUN GCR3-618-W
Robot typeSix axis collaborative welding robot
Maximum payload3 kg
Reach618 mm
Repeatability±0.02 mm
Maximum TCP speed1.0 m/s (0.8 m/s linear)
ProtectionIP54/IP65
Joint range and speed±360° and 225°/s on all joints*
Tool flange and I/OISO 9409-1 compatible; two 24 V digital I/O*
CommunicationTCP/IP, Modbus/TCP, Profinet, EtherNet/IP*
Welding functionsSpot, fillet, weave, reciprocating, cladding, multi-layer multi-pass
ProgrammingGraphical interface and drag teaching
OptionsExternal axis plug-in package

*Values marked with an asterisk come from a single published SIASUN datasheet listing. Arm weight is not published for this model. Confirm all values on the current parameter sheet when you request a quote. The welding power source, torch and wire feeder are chosen per project.

Features

Smallest Welding Cobot in the Range

A 618 mm reach fits a standard workbench. The robot, a small table and the welding equipment can share the footprint of a manual welding station.

High Precision for Tiny Parts

Repeatability of ±0.02 mm keeps short seams and spot welds in the same place on every part, which matters when the part itself is only a few centimeters across.

Controlled, Steady Motion

A maximum TCP speed of 1.0 m/s is lower than the larger W models. On small parts, travel distances are short, so the steady motion suits careful, close range work.

Welding Package as Standard

The professional welding process package aims to balance specialist functions with ease of use, covering spot, fillet, weave, reciprocating, cladding and multi-layer, multi-pass welding.

Teach by Hand

Drag teaching lets the welder move the torch along the seam to record points, and the graphical interface sets weld type and parameters, with no coding needed.

Compatible and Expandable

Communication interfaces work with mainstream welding machine brands, and the optional external axis plug-in adds a small positioner. SIASUN also offers vision integration.

Applications

  • Very small parts. Terminals, brackets, sensor housings and small fittings.
  • Wire and light frames. Short welds on thin rod and wire forms.
  • Welding training. Schools and training centers teaching robotic welding on a bench.
  • Prototyping. Small batches and test parts in engineering shops.

See more welding robots and SIASUN industrial robots.

Which Should You Buy?

OptionPayloadReachBest for
SIASUN GCR3-618-W3 kg618 mmBench top cells, tiny parts, training
SIASUN GCR5-910-W5 kg917 mmSmall parts and thin sheet
SIASUN GCR10-1300-W10 kg1300 mmLarger parts and heavier torches
SIASUN arc welding robotic solution12 kg1465 to 2010 mmFenced, high volume arc welding cells

Before You Buy

  • Check the torch weight. Keep torch, cable package and any sensor within 3 kg; use a light torch.
  • Check the reach. Make sure every seam lies within 618 mm at the right torch angle.
  • Check cycle time. With 1.0 m/s maximum speed, confirm the robot meets your takt time.
  • Choose the power source. Confirm compatibility with your welding machine and wire feeder.
  • Plan the cell. Include fume extraction, welding screens and a risk assessment.

Pricing and Availability

The SIASUN GCR3-618-W is supplied on a quotation basis. The final cost depends on the welding equipment, torch, table, positioner, vision, shipping and integration. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your project.

Frequently Asked Questions

What is the SIASUN GCR3-618-W?

The smallest DUCO six axis collaborative welding robot, with 3 kg payload, 618 mm reach and ±0.02 mm repeatability.

Which welds can it do?

Its standard package covers spot, fillet, weave, reciprocating, cladding and multi-layer, multi-pass welding.

How is it programmed?

By drag teaching and a graphical interface, without writing code.

How is it different from the GCR5-910-W?

The GCR3-618-W is smaller, with 3 kg and 618 mm. The GCR5-910-W carries 5 kg, reaches 917 mm and moves faster.

Is it suitable for training?

Its small size and hand teaching make it a practical choice for welding schools and training benches.

Where can I buy the SIASUN GCR3-618-W?

You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.

Summary

The SIASUN GCR3-618-W is a mini welding cobot with 3 kg, 618 mm and ±0.02 mm, drag teaching and a standard welding package. It turns a bench into a precise welding cell for tiny parts, prototypes and training. Request a quote on this page to plan it for your work.

المواصفات

General

ماركة SIASUN
نموذج GCR3-618-W
الجزء # GCR3-618-W
نوع الروبوت كوبوت
استخدام الروبوت مصنع, صناعية, بحث

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: SIASUN GCR3-618-W
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.