SIASUN GCR5-910-W

The SIASUN GCR5-910-W is a compact DUCO collaborative welding robot with a 5 kg payload, 917 mm reach, ±0.02 mm repeatability and IP54/IP65 protection. Graphical programming and drag teaching make it quick to set up, and its standard welding process package covers spot, fillet, weave, reciprocating, cladding and multi-layer, multi-pass welding. Small and light, it suits table top cells for small parts and thin sheet, with an optional external axis plug-in for positioners.

متوفر

ماركة:
SIASUN
نموذج:
GCR5-910-W
الجزء #:
GCR5-910-W
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-GCR5-910-W

SIASUN GCR5-910-W

Many welding jobs are small: brackets, fittings, thin sheet enclosures, frames for furniture and appliances. They need clean, repeatable seams, but not a large robot or a big fenced cell. The SIASUN GCR5-910-W is the compact welding cobot in SIASUN's DUCO range. With a 5 kg payload, 917 mm reach and ±0.02 mm repeatability, it fits on a welding table and handles small parts with high precision, while the welder teaches it by hand.

Background

SIASUN is a Chinese robotics and automation company that builds industrial robots, collaborative robots, mobile robots and complete production lines. DUCO is its collaborative robot brand, and the GCR series is its main cobot range. The W versions are welding models. SIASUN describes them as collaborative welding robots with two core functions, graphical interaction and drag teaching, and a standard welding process package for a wide range of welding tasks. The GCR5-910-W is the smaller sibling of the GCR10-1300-W.

Key Specifications

SpecificationSIASUN GCR5-910-W
Robot typeSix axis collaborative welding robot
Maximum payload5 kg
Reach917 mm
Repeatability±0.02 mm
Maximum TCP speed3.6 m/s (1.5 m/s linear)
ProtectionIP54/IP65 (arm IP65, control cabinet IP54)*
Robot weightAbout 22 kg*
Joint range and speed±360° and 225°/s on all joints*
MountingFloor, ceiling or wall*
Control cabinetDC15S, 48 V, about 13.6 kg*
Typical powerAbout 200 W*
CommunicationTCP/IP, Modbus/TCP, Profinet, EtherNet/IP, CAN, RS485, EtherCAT*
Welding functionsSpot, fillet, weave, reciprocating, cladding, multi-layer multi-pass
ProgrammingGraphical interface and drag teaching
OptionsExternal axis plug-in package

*Values marked with an asterisk come from a single published SIASUN datasheet listing. Confirm them on the current parameter sheet when you request a quote. The welding power source, torch and wire feeder are chosen per project.

Features

High Precision for Small Parts

Repeatability of ±0.02 mm is the tightest of SIASUN's welding cobots in our range. It helps keep short seams and tack welds in exactly the same place on every part.

Small, Light and Easy to Place

At about 22 kg according to published figures, the arm can sit on a welding table, a cart or a light frame, and it leaves room for the welder to work beside it.

Welding Package as Standard

The professional welding process package aims to balance specialist functions with ease of use, covering spot, fillet, weave, reciprocating, cladding and multi-layer, multi-pass welding.

Teach by Hand

Drag teaching lets the welder move the torch along the seam to record points, and the graphical interface sets weld type and parameters. That suits short batches and frequent changeovers.

Works With Mainstream Welders

Communication interfaces compatible with mainstream welding machine brands make it largely plug and play with common power sources.

Expandable

The optional external axis plug-in adds positioners, and development interfaces help integrators build complete welding workstations. SIASUN also offers vision integration.

Applications

  • Thin sheet. Enclosures, covers and cabinets where heat and distortion must be controlled.
  • Small brackets and fittings. Short seams and tack welds in high mix batches.
  • Furniture and appliance frames. Tube and profile joints on small assemblies.
  • Training. Welding schools and shops learning robotic welding.
  • Positioner cells. Small round parts with an external axis.

See more welding robots and SIASUN industrial robots.

Which Should You Buy?

OptionPayloadReachBest for
SIASUN GCR5-910-W5 kg917 mmSmall parts and thin sheet on a table
SIASUN GCR10-1300-W10 kg1300 mmLarger parts and heavier torches
SIASUN arc welding robotic solution12 kg1465 to 2010 mmFenced, high volume arc welding cells
SIASUN laser welding robotic solution12 to 25 kg1465 to 1803 mmSlim, low distortion laser seams

Before You Buy

  • Check the torch weight. Keep torch, cable package and any sensor within 5 kg; a light torch works best.
  • Check the reach. Make sure every seam lies within 917 mm at the right torch angle.
  • Choose the power source. Confirm compatibility with your welding machine and wire feeder.
  • Plan the cell. Include fume extraction, welding screens and a risk assessment.
  • Size up if needed. For larger parts or longer seams, consider the GCR10-1300-W.

Pricing and Availability

The SIASUN GCR5-910-W is supplied on a quotation basis. The final cost depends on the welding equipment, torch, positioner, table or cart, vision, shipping and integration. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your project.

Frequently Asked Questions

What is the SIASUN GCR5-910-W?

A compact DUCO six axis collaborative welding robot with 5 kg payload, 917 mm reach and ±0.02 mm repeatability.

Which welds can it do?

Its standard package covers spot, fillet, weave, reciprocating, cladding and multi-layer, multi-pass welding.

How is it programmed?

By drag teaching and a graphical interface, without writing code.

How is it different from the GCR10-1300-W?

The GCR5-910-W is smaller and more precise (±0.02 mm). The GCR10-1300-W carries 10 kg and reaches 1300 mm for larger parts.

Does it work with my welding machine?

SIASUN states it is compatible with mainstream welding machine brands. Our team will confirm your model.

Where can I buy the SIASUN GCR5-910-W?

You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.

Summary

The SIASUN GCR5-910-W is a compact 5 kg, 917 mm welding cobot with ±0.02 mm repeatability, drag teaching and a standard welding package. It suits table top cells for small parts and thin sheet. Request a quote on this page to plan it for your parts.

المواصفات

General

ماركة SIASUN
نموذج GCR5-910-W
الجزء # GCR5-910-W
نوع الروبوت كوبوت
استخدام الروبوت مصنع, صناعية, بحث

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: SIASUN GCR5-910-W
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.