SIASUN HC-X2-L

The SIASUN HC-X2-L is a DUCO mobile collaborative robot built on a low, 700 mm high platform that carries up to 670 kg alongside its GCR series cobot arm. It navigates by SLAM and QR code with ±0.3 mm overall accuracy and can be fitted with vision systems, grippers and other tools for loading and unloading, handling, assembly and inspection. Ground and airspace safety protection, one teaching pendant for platform and arm, and flexible charging support round the clock work.

متوفر

ماركة:
SIASUN
نموذج:
HC-X2-L
الجزء #:
HC-X2-L
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-HC-X2-L

SIASUN HC-X2-L

Some mobile robot jobs are about the arm, and some are about what the robot carries. Tending machines often means both: moving trays, fixtures or parts between stations and then loading them with a cobot. The SIASUN HC-X2-L is built for that combination. It is a DUCO mobile collaborative robot on a low, 700 mm high platform that carries up to 670 kg, with a GCR series cobot arm on top for loading, unloading and inspection at each stop.

Background

SIASUN is a Chinese robotics and automation company that builds industrial robots, collaborative robots, mobile robots and complete production lines. DUCO is its collaborative robot brand. The HC-X2-L is part of the DUCO mobile cobot range, which SIASUN describes as integrating a self-developed mobile platform and a collaborative robot, ready for vision systems, grippers and other execution units. It shares the same 1250 × 600 mm footprint and navigation as the SIASUN HC-X2-T, but uses a lower body and a far higher platform load, so it suits jobs where the robot also has to transport heavy material.

Key Specifications

SpecificationSIASUN HC-X2-L
Robot typeMobile collaborative robot (mobile platform plus cobot arm)
Dimensions (L × W × H)1250 × 600 × 700 mm, excluding arm and side laser
Platform load670 kg maximum
Overall accuracy±0.3 mm
NavigationSLAM and QR code
Cobot arm optionsSIASUN GCR5, GCR10, GCR14, GCR16 or GCR20*
Arm payload5 to 20 kg, depending on arm*
Total weightAbout 320 to 361 kg, depending on arm*
DriveDual wheel differential*
SpeedUp to 1 m/s; turning up to 0.5 m/s*
Minimum aisle and turning radius900 mm aisle, 500 mm turning radius*
Parking accuracy±5 mm, ±1°*
Floor limits10 mm step, 30 mm gap, 30 mm ground clearance, below 5% slope*
Battery51.2 V LiFePO4, 52 Ah*
Running and charging timeAbout 5.5 h; charge in 1.8 h or less*
InterfacesCAN, RS-485, RS-232, RJ45, USB; CANopen and Modbus*
EnvironmentIndoor, −10 to 45 °C, 5 to 95% RH non condensing*
Cleanroom optionsStandard, Class 6 or Class 5*

*Values marked with an asterisk come from a single published SIASUN datasheet listing. Confirm them on the current parameter sheet when you request a quote.

Features

Carry and Work in One Trip

With 670 kg of platform load, the HC-X2-L can bring heavy trays, fixtures or batches of parts to a machine and load them with its cobot arm, instead of needing a separate transport robot.

Low, Stable Body

The 700 mm body keeps the arm closer to typical table and conveyor heights and lowers the center of gravity. A custom chassis wheel system is designed for stability and reliability.

Accurate Docking

SLAM navigation plans the route and QR codes help the robot dock at each station, with ±0.3 mm overall accuracy for loading and inspection.

Wide Arm Choice

Published listings name five GCR arms, from the light GCR5 to the GCR20, so the arm can match the tool and part.

Safety for Shared Spaces

SIASUN provides real time protection at ground level and in the airspace around the robot. Published safety devices include collision detection, safety edges, obstacle avoidance lasers and emergency stops.

One Pendant, Flexible Charging

An integrated teaching pendant controls platform and arm from one screen. Contact, wireless and automatic charging support short shifts and 24/7 work.

Applications

  • Machine loading and unloading. Bringing trays or fixtures and loading machines at several stations.
  • Inspection. Carrying vision systems along a line to check products.
  • Heavy material handling. Moving batches of parts while picking and placing with the arm.
  • Assembly support. Delivering kits and fitting parts at assembly stations.
  • Clean production. Electronics and similar work in cleanroom versions.

Which Should You Buy?

OptionHeightPlatform loadBest for
SIASUN HC-X2-L700 mm670 kgCarrying heavy material and tending machines
SIASUN HC-X2-T1070 mm100 kgArm work at higher benches, screwing and inspection
SIASUN MHR360Mecanum wheel compound robotOmnidirectional moves in tight spaces
SIASUN GCR series cobotsFixed cobot armOne station that does not need to move

See all SIASUN mobile robots, autonomous mobile robots and SIASUN industrial robots.

Before You Buy

  • Check working heights. Make sure the arm can reach your machines and benches from a 700 mm base.
  • Weigh the load. Add trays, fixtures and parts and keep them within the platform rating.
  • Choose the arm. Match GCR5 to GCR20 to your tool, part weight and reach.
  • Walk the route. Check aisle width, steps, gaps and slopes, especially with heavy loads.
  • Do a risk assessment. Confirm safety zones and speeds where people work near the robot.

Pricing and Availability

The SIASUN HC-X2-L is supplied on a quotation basis. The final cost depends on the arm, top module, charging, vision and tooling, software, shipping and integration. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your project.

Frequently Asked Questions

What is the SIASUN HC-X2-L?

A DUCO mobile collaborative robot: a low SIASUN mobile platform with a GCR series cobot arm.

How much can the platform carry?

Up to 670 kg.

What is the difference from the HC-X2-T?

The HC-X2-L is lower (700 mm against 1070 mm) and carries far more on the platform (670 kg against 100 kg). The HC-X2-T puts the arm higher for bench work.

How does it navigate?

By SLAM and QR code, with ±0.3 mm overall accuracy.

How long does the battery last?

About 5.5 hours with the 52 Ah battery, according to published listings.

Where can I buy the SIASUN HC-X2-L?

You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.

Summary

The SIASUN HC-X2-L combines a low, 670 kg capacity mobile platform with a GCR series cobot arm, SLAM and QR navigation and ±0.3 mm accuracy, so one robot can carry heavy material and load, unload or inspect at each station. Request a quote on this page to plan it for your line.

المواصفات

General

ماركة SIASUN
نموذج HC-X2-L
الجزء # HC-X2-L
نوع الروبوت كوبوت
استخدام الروبوت مصنع, صناعية, بحث

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: SIASUN HC-X2-L
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.