SIASUN SA20A-20/0.80

The SIASUN SA20A-20/0.80 packs a 20 kg maximum payload into a compact 800 mm SCARA. It shares the stiff double supported arms and reinforced ball screw spline of the SA20A series, so it handles heavy grippers and high inertia tools in tight cells where a longer arm would waste floor space. Internal wiring and four programming methods keep setup simple.

متوفر

ماركة:
SIASUN
نموذج:
SA20A-20/0.80
الجزء #:
SA20A-20/0.80
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-SA20A-20-0-80

SIASUN SA20A-20/0.80

Floor space on a production line is rarely spare. When a station needs to lift a heavy gripper or a full tray of parts, the usual answer is a bigger robot, and with it a bigger cell. The SIASUN SA20A-20/0.80 takes the other route. It keeps the 20 kg maximum payload and stiff structure of SIASUN's largest SCARA but folds them into an 800 mm arm, so heavy pick and place and assembly fit into a compact footprint beside a conveyor, a press or a test station.

Background

SIASUN is a Chinese robotics manufacturer whose industrial range includes SCARA robots, six axis arms, collaborative robots and mobile robots. Its SA series is a newer generation of SCARA robots built for high inertia, rigidity and precision, with a modular design that SIASUN says reduces maintenance cost. The SA20A is the heavy duty member of the series and comes in two lengths. The SA20A-20/0.80 is the 800 mm version; the SA20A-20/1.00 extends the same arm to 1000 mm.

Key Specifications

SpecificationSIASUN SA20A-20/0.80
Robot type4 axis SCARA robot
Payload20 kg maximum (10 kg rated)*
Reach (J1+J2)800 mm
RepeatabilityJ1+J2 ±0.025 mm, J3 ±0.01 mm, J4 ±0.01°
Vertical stroke (J3)420 mm*
Axis rangeJ1 ±142°, J2 ±152°, J4 ±360°*
Maximum speedJ1+J2 9550 mm/s, J3 1150 mm/s, J4 705°/s*
Robot weightAbout 53 kg*
MountingTabletop*
ControllerSIASUN SRC S6*
ProtectionIP20
Ambient conditions0 to 45°C, 10 to 80% relative humidity*

*Values marked with an asterisk come from published SIASUN datasheet listings. Confirm them on the current parameter sheet when you request a quote.

Features

Heavy Payload in a Short Arm

A shorter arm puts less leverage on the joints, so the full 20 kg is carried closer to the base. That makes the 800 mm model a natural choice when the parts are heavy but the distances are short, such as transferring between two adjacent conveyors or loading a fixture right beside the robot.

Rigid Double Support Structure

Each arm link is supported on both sides of its joint rather than one. The result is an arm that resists twisting when the load is heavy or sits off center, which keeps placement consistent through long production runs.

Stronger Ball Screw Spline

SIASUN reinforced the combined ball screw spline that drives the vertical and rotation axis, and states gains of about 30% in torsional rigidity and about 70% in rotational rigidity over its earlier design. This lets the robot turn wide, high inertia grippers quickly and settle without overshoot.

Stable at Speed

The base is designed to resist overturning, which matters when a heavy tool accelerates and stops many times per minute. Published figures list a combined J1 and J2 speed of up to 9550 mm/s.

Easy to Install and Program

Cabling and air lines run inside the arm, with no external corrugated hose. Engineers can program the robot with SIASUN's PC software, a teach pendant, a virtual teach pendant, or by guiding the arm by hand with drag teaching.

Applications

  • Battery cell and module handling. Moving heavy cells, modules and trays between process steps in compact lithium battery lines.
  • Automotive parts. Picking and placing housings, brackets and small subassemblies.
  • Conveyor transfer and sorting. Moving parts between short conveyors or into bins, often with vision guidance.
  • Assembly and insertion. Pressing and inserting components with straight, rigid vertical motion.
  • Gluing and dispensing. Applying adhesive on flat parts at steady speed.

Find more options in our factory robots and industrial robots ranges.

Which Should You Buy?

ModelMax payloadReachBest for
SIASUN SA20A-20/0.8020 kg800 mmHeavy parts in a compact cell
SIASUN SA20A-20/1.0020 kg1000 mmHeavy parts over a wider working area
SIASUN SA10A-10/0.8010 kg800 mmSame reach with lighter tools and faster rotation
SIASUN SA10A-10/0.6010 kg600 mmMedium loads on a small bench
SIASUN SA7A-7/0.507 kg500 mmLight, fast pick and place

If parts must be tilted or turned over, a six axis arm may suit better. Browse all SIASUN industrial robots.

Before You Buy

  • Use the rated load for cycle time. 20 kg is the maximum. Standard speeds are usually quoted at the rated load, so check your gripper and part weight, plus inertia, against the load chart.
  • Check that 800 mm is enough. Lay out every pick and place point inside the reach and joint limits. If any point falls outside, consider the 1000 mm model.
  • Prepare a stiff mounting. Fast moves with a heavy tool need a rigid, anchored table or pedestal.
  • Match the environment. IP20 is meant for clean, dry indoor areas.
  • Plan tooling and integration. Confirm internal air and signal lines suit your gripper, check PLC and vision communication, and plan guarding.

Pricing and Availability

The SIASUN SA20A-20/0.80 is supplied on a quotation basis. The final cost depends on controller options, cable length, tooling, shipping and any integration work. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your location.

Frequently Asked Questions

What is the payload of the SIASUN SA20A-20/0.80?

The maximum payload is 20 kg. Published datasheet listings give a rated payload of 10 kg.

What is its reach?

The combined J1 and J2 reach is 800 mm.

How precise is it?

Repeatability is ±0.025 mm in the horizontal plane, ±0.01 mm on the vertical axis and ±0.01° in rotation.

Should I choose the 0.80 or the 1.00 model?

Both carry up to 20 kg with the same precision. Choose the 800 mm model for a smaller, lighter installation, and the 1000 mm model if your points are spread further apart.

How is it programmed?

With SIASUN's PC software, a teach pendant, a virtual teach pendant or drag teaching by hand.

Can it be used in wet or dusty areas?

It is rated IP20 for clean indoor use. Ask about protection options for harsher conditions.

Where can I buy the SIASUN SA20A-20/0.80?

You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.

Summary

The SIASUN SA20A-20/0.80 gives compact cells the strength of a heavy duty SCARA: 20 kg maximum payload, 800 mm reach, a rigid double supported arm, a reinforced ball screw spline and internal wiring. It suits battery, automotive and assembly stations where loads are heavy and space is tight. Request a quote on this page to check it against your application.

المواصفات

General

ماركة SIASUN
نموذج SA20A-20/0.80
الجزء # SA20A-20/0.80
استخدام الروبوت صناعية

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: SIASUN SA20A-20/0.80
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.