SIASUN SA20A-20/1.00
متوفر
- ماركة:
- SIASUN
- نموذج:
- SA20A-20/1.00
- الجزء #:
- SA20A-20/1.00
- ORIGIN:
- الصين
- Warranty:
- 12 MONTHS
- AVAILABILITY:
- FOR OPPORTUNITIES OVER 1 MILLION USD
- SKU:
- SIASUN-SA20A-20-1-00
SIASUN SA20A-20/1.00
SCARA robots are known for speed on light parts, but many production lines need that same fast, flat motion with heavier loads: battery cells and modules, automotive components, large grippers with several suction cups. As payload and tool inertia grow, a standard SCARA starts to flex and overshoot. The SIASUN SA20A-20/1.00 is built for that heavier end of the SCARA range, with a 20 kg maximum payload, a 1000 mm reach and a structure reinforced for stiffness.
Background
SIASUN is a Chinese robotics manufacturer whose industrial range covers SCARA robots, six axis arms, collaborative robots and mobile robots. The SA series is its newer generation of SCARA robots, designed around high inertia capacity, rigidity and precision, with a modular layout that SIASUN says lowers maintenance cost. Model names give series, maximum payload in kilograms and reach in meters, so the SA20A-20/1.00 is the 20 kg SA20A with a 1.00 m reach, the top of the series.
Key Specifications
| Specification | SIASUN SA20A-20/1.00 |
|---|---|
| Robot type | 4 axis SCARA robot |
| Payload | 20 kg maximum (10 kg rated)* |
| Reach (J1+J2) | 1000 mm |
| Repeatability | J1+J2 ±0.025 mm, J3 ±0.01 mm, J4 ±0.01° |
| Vertical stroke (J3) | 420 mm* |
| Axis range | J1 ±142°, J2 ±152°, J4 ±360°* |
| Maximum speed | J1+J2 10,800 mm/s, J3 1150 mm/s, J4 705°/s* |
| Robot weight | About 56 kg* |
| Mounting | Tabletop* |
| Controller | SIASUN SRC S6* |
| Protection | IP20 |
| Ambient conditions | 0 to 45°C, 10 to 80% relative humidity* |
*Values marked with an asterisk come from published SIASUN datasheet listings. Confirm them on the current parameter sheet when you request a quote.
Features
Double Supported Arms
Both arm links use a double support structure, carrying load on bearings at each side of the joint instead of one. This keeps the arm from twisting under a heavy or offset load, so the tool arrives where it was taught even at full speed.
Reinforced Ball Screw Spline
The vertical and rotation axis uses a combined ball screw spline that SIASUN says raises torsional rigidity by about 30% and rotational rigidity by about 70% over its earlier design. In practice that means the SA20A can rotate larger, wider grippers with higher inertia without losing accuracy or settling slowly.
Anti Overturning Design
Fast moves with a heavy tool create large tipping forces at the base. The SA20A is designed to resist overturning, which helps it hold position and protects the mounting during aggressive cycles.
Clean, Simple Deployment
Cables and air lines run inside the arm, so there is no external corrugated hose to snag, wear or interfere with nearby equipment. Programming is flexible: you can use SIASUN's PC software, the teach pendant, a virtual teach pendant or hand guided drag teaching.
Applications
- Lithium battery production. Moving cells, modules and fixtures between stations where weight and placement accuracy both matter.
- Automotive components. Handling and assembling heavier parts such as housings, brackets and subassemblies.
- Large part pick and place. Transferring parts with multi cup or multi finger grippers across a wide 1000 mm working radius.
- Sorting. Picking mixed parts from conveyors into bins or trays, often guided by vision.
- Assembly. Pressing, inserting and stacking components that need straight vertical motion.
- Gluing and dispensing. Running adhesive paths on flat parts with steady speed.
For other options on the factory floor, see our factory robots and industrial robots.
Which Should You Buy?
| Model | Max payload | Reach | Best for |
|---|---|---|---|
| SIASUN SA20A-20/1.00 | 20 kg | 1000 mm | Heavy parts across the widest working area |
| SIASUN SA20A-20/0.80 | 20 kg | 800 mm | Same payload in a more compact cell |
| SIASUN SA10A-10/0.80 | 10 kg | 800 mm | Medium loads with good reach |
| SIASUN SA7A-7/0.70 | 7 kg | 700 mm | Light, fast pick and place |
| SIASUN SA4A-4/0.40 | 4 kg | 400 mm | Small parts and electronics on a tight bench |
If your process needs to tilt or reorient parts, a six axis arm may suit better. Browse the full range in SIASUN industrial robots.
Before You Buy
- Check rated versus maximum payload. The 20 kg figure is the maximum. Speed and acceleration are typically specified at the rated load, so compare your gripper plus part weight, and its inertia, with the load chart.
- Map the working area. Confirm every pick and place point sits within the 1000 mm radius, the joint limits and the vertical stroke.
- Plan a rigid base. A heavy SCARA moving at high speed needs a stiff, well anchored table or pedestal.
- Consider the environment. IP20 suits clean, dry indoor areas. Ask about protection if your cell has dust, liquids or coolant.
- Check tooling utilities. Confirm the internal air lines and signal wiring cover your gripper and sensors.
- Confirm integration. Check controller communication with your PLC and vision system, and plan guarding and safety.
Pricing and Availability
The SIASUN SA20A-20/1.00 is supplied on a quotation basis. The final cost depends on controller options, cable length, tooling, shipping and any integration work. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your location.
Frequently Asked Questions
What is the payload of the SIASUN SA20A-20/1.00?
Its maximum payload is 20 kg. Published datasheet listings give a rated payload of 10 kg, which is the load used for the standard speed figures.
How far can it reach?
The combined J1 and J2 reach is 1000 mm, the longest in the SA series.
How precise is it?
Repeatability is ±0.025 mm in the horizontal plane, ±0.01 mm on the vertical axis and ±0.01° on rotation.
What is the difference between the SA20A-20/1.00 and the SA20A-20/0.80?
Both carry up to 20 kg. The 1.00 model reaches 1000 mm and the 0.80 model reaches 800 mm. Choose the shorter model if your cell is compact and you do not need the extra radius.
How is it programmed?
Through SIASUN's PC software, a teach pendant, a virtual teach pendant or drag teaching by hand.
Can it work in dusty or wet areas?
It is rated IP20, which is meant for clean indoor environments. Ask about protection options for harsher conditions.
Where can I buy the SIASUN SA20A-20/1.00?
You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.
Summary
The SIASUN SA20A-20/1.00 brings SCARA speed to heavier work. With a 20 kg maximum payload, 1000 mm reach, double supported arms, a reinforced ball screw spline and internal wiring, it is built for battery, automotive and large part handling where a light SCARA would flex. Request a quote on this page to check it against your application.