SIASUN SA4A-4/0.40

The SIASUN SA4A-4/0.40 is the smallest and most precise SCARA in SIASUN's SA series: a four axis robot with a 4 kg maximum payload, 400 mm reach and ±0.01 mm repeatability on every axis. Light, compact and low in height, with SIASUN's own core components, plenty of user cabling and the S series controller, it is built for fast, accurate handling, sorting, assembly and gluing in 3C and automotive electronics.

متوفر

ماركة:
SIASUN
نموذج:
SA4A-4/0.40
الجزء #:
SA4A-4/0.40
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-SA4A-4-0-40

SIASUN SA4A-4/0.40

Phone cameras, connectors, chip components and tiny screws all need to be placed within hundredths of a millimeter, thousands of times an hour. Robots for that work have to be small, light and above all precise. The SIASUN SA4A-4/0.40 is the smallest SCARA in SIASUN's SA series and its most precise, with ±0.01 mm repeatability on every axis, a 4 kg maximum payload and a 400 mm reach, in a body light enough to sit on a desktop.

Background

SIASUN is a Chinese robotics manufacturer whose industrial range covers SCARA robots, six axis arms, collaborative robots and mobile robots. Its SA series is a newer generation of SCARA robots with a modular design. The SA4A is the entry point of that series, designed around good performance, strong expandability and easy operation, with a compact body, a lower overall height and high speed cycles. SIASUN aims it mainly at 3C (computer, communication and consumer electronics) and automotive electronics.

Key Specifications

SpecificationSIASUN SA4A-4/0.40
Robot type4 axis SCARA robot
Payload4 kg maximum (2 kg rated)*
Reach (J1+J2)400 mm
RepeatabilityJ1+J2 ±0.01 mm, J3 ±0.01 mm, J4 ±0.01°
ProtectionIP20
Maximum speedJ1+J2 7200 mm/s, J3 1150 mm/s, J4 2600°/s*
Standard cycle time0.38 s*
J3 press force100 N*
Axis rangeJ1 ±132°, J2 ±141°, J3 150 mm, J4 ±360°*
J4 allowable inertia0.005 kg·m² rated, 0.05 kg·m² maximum*
Robot weightAbout 13 kg*
MountingTabletop*
ControllerSIASUN S series (SRC S6)*
Tool interfaces15 pin D-sub user cable, Ethernet CAT5E, air lines 2 × Ø6 mm + 1 × Ø4 mm*
Power and noise150 W rated, below 70 dB*

*Values marked with an asterisk come from a published SIASUN datasheet listing. Confirm them on the current parameter sheet when you request a quote.

Features

Highest Precision in the SA Series

Repeatability is ±0.01 mm in the horizontal plane and on the vertical axis, and ±0.01° in rotation. That is tighter than the larger SA SCARAs and suits placing fine pitch components, aligning lenses and inserting small connectors.

Small, Light and Low

The SA4A has a compact body and a lower overall height. At about 13 kg according to published figures, it can be mounted on a desktop, a light frame or inside a small machine, and it leaves room above for cameras and feeders.

Fast Short Moves

Published figures list combined J1 and J2 speed up to 7200 mm/s, J4 rotation up to 2600°/s and a standard cycle of 0.38 seconds, so short, frequent pick and place moves finish quickly.

Light Pressing on J3

The vertical axis can apply around 100 N according to published figures, enough for many small snap fits and insertions.

Easy to Use

SIASUN's own core components, abundant user cabling, a 15 pin D-sub, an Ethernet line and three air lines at the tool, plus the S series controller with multiple programming and teaching methods, make the SA4A straightforward to set up and adapt. Published figures give rated power of 150 W and noise below 70 dB, which suits benches near operators.

Applications

  • 3C electronics assembly. Placing chips, cameras, connectors and small parts in phones, tablets and computers.
  • Automotive electronics. Assembling sensors, switches and small control modules.
  • Sorting. Picking tiny parts by type or quality, often with vision.
  • Handling. Transferring small parts between trays, feeders and fixtures.
  • Gluing. Dispensing precise dots and lines of adhesive.

Browse more options in our factory robots and industrial robots ranges.

Which Should You Buy?

ModelMax payloadReachBest for
SIASUN SA4A-4/0.404 kg400 mmFinest precision on tiny parts
SIASUN SA7A-7/0.507 kg500 mmHeavier grippers in a desk sized cell
SIASUN SA7A-7/0.607 kg600 mmTest and inspection stations
SIASUN SA10A-10/0.6010 kg600 mmHeavier tools in a compact cell
SIASUN SN4A-4/0.584 kg580 mmSix axis flexibility for small parts

See all SIASUN SCARA robots and SIASUN industrial robots.

Before You Buy

  • Use the rated load for cycle time. 4 kg is the maximum and 2 kg the rated load. Check gripper plus part weight and the low J4 inertia limit.
  • Measure the cell. Confirm every point lies within 400 mm, the joint limits and the 150 mm J3 stroke.
  • Match accuracy to tolerance. ±0.01 mm suits fine assembly; add vision if parts are not presented consistently.
  • Check the environment. IP20 suits clean, dry indoor areas such as electronics assembly.
  • Confirm integration. Check PLC, feeder and vision communication, tool utilities and guarding.

Pricing and Availability

The SIASUN SA4A-4/0.40 is supplied on a quotation basis. The final cost depends on controller options, cable length, tooling, shipping and integration. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your location.

Frequently Asked Questions

What is the payload of the SIASUN SA4A-4/0.40?

The maximum payload is 4 kg. Published datasheet listings give a rated payload of 2 kg.

How far can it reach?

The combined J1 and J2 reach is 400 mm.

How precise is it?

Repeatability is ±0.01 mm horizontally and vertically, and ±0.01° in rotation, the tightest in the SA series.

Which industries is it for?

SIASUN aims it mainly at 3C electronics and automotive electronics.

How much does it weigh?

About 13 kg according to published datasheet listings.

Should I choose a SCARA or the six axis SN4A-4/0.58?

Choose the SA4A for fast, flat pick and place with the highest precision. Choose the SN4A when parts must be tilted or approached from the side.

Where can I buy the SIASUN SA4A-4/0.40?

You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.

Summary

The SIASUN SA4A-4/0.40 is a mini SCARA for precise, fast electronics work: 4 kg maximum payload, 400 mm reach, ±0.01 mm repeatability, a 0.38 s standard cycle and a light, low body of about 13 kg. It suits 3C and automotive electronics assembly, sorting and gluing. Request a quote on this page to check it against your application.

المواصفات

General

ماركة SIASUN
نموذج SA4A-4/0.40
الجزء # SA4A-4/0.40
استخدام الروبوت صناعية

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: SIASUN SA4A-4/0.40
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.