SIASUN SA7A-7/0.50

The SIASUN SA7A-7/0.50 is the smallest model in SIASUN's SA7A SCARA line: a compact four axis robot with a 7 kg maximum payload, 500 mm reach and ±0.02 mm repeatability. Weighing about 19 kg with a low overall height, it fits on narrow benches and inside equipment modules, while its double supported arm, user cabling and S series controller suit precise handling, sorting, assembly and gluing of small parts.

متوفر

ماركة:
SIASUN
نموذج:
SA7A-7/0.50
الجزء #:
SA7A-7/0.50
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-SA7A-7-0-50

SIASUN SA7A-7/0.50

Some automation cells are no bigger than a desk. A screw feeder on one side, a fixture in the middle, an output tray on the other, all within half a meter. Putting a large robot there wastes space and adds cost, while a too small robot cannot carry the gripper. The SIASUN SA7A-7/0.50 sits in between. It is the smallest SA7A SCARA, with a 500 mm reach, yet it keeps the 7 kg maximum payload and ±0.02 mm repeatability of its larger siblings.

Background

SIASUN is a Chinese robotics manufacturer whose industrial range covers SCARA robots, six axis arms, collaborative robots and mobile robots. Its SA series is a newer generation of SCARA robots with a modular design that SIASUN says serves more automation scenarios and lowers maintenance cost. The SA7A is the light 7 kg line, available in 500, 600 and 700 mm reaches, for 3C electronics, lithium battery, photovoltaic and automotive electronics production. The 0.50 model is the most compact of the three.

Key Specifications

SpecificationSIASUN SA7A-7/0.50
Robot type4 axis SCARA robot
Payload7 kg maximum (3 kg rated)*
Reach (J1+J2)500 mm
RepeatabilityJ1+J2 ±0.02 mm, J3 ±0.01 mm, J4 ±0.01°
ProtectionIP20
Maximum speedJ1+J2 7120 mm/s, J3 1150 mm/s, J4 2000°/s*
Axis rangeJ2 ±150°, J3 200 mm, J4 ±360°*
Robot weightAbout 19 kg*
MountingTabletop*
ControllerSIASUN S series (SRC S6)*

*Values marked with an asterisk come from a published SIASUN datasheet listing. Confirm them, together with the J1 range, on the current parameter sheet when you request a quote.

Features

Smallest Footprint in the Line

With a 500 mm reach, the SA7A-7/0.50 covers a working area sized for a single workstation. It can sit at the back of a bench or in the corner of a machine module and still reach every point of a compact fixture.

Light, Low and Easy to Mount

SIASUN built the SA7A to be lightweight, compact and lower in overall height. At about 19 kg according to published figures, the 0.50 model is the lightest in its line, which makes it simple to install on small frames, carts or inside equipment.

Full Payload in a Small Arm

The short arm keeps the same 7 kg maximum payload, so it can carry multi function grippers, screwdrivers or vacuum tools that would overload a smaller class SCARA.

Stiff, Precise Motion

A double supported structure and new SIASUN core components give high rigidity and low vibration. Repeatability of ±0.02 mm suits fine insertion and placement of small parts.

Expandable

User cables run to the tool, and SIASUN's new S series control cabinet supports multiple programming and teaching methods, so the cell can be adapted as products change.

Applications

  • Small part assembly. Placing, inserting and fastening tiny components in electronics and automotive electronics.
  • Benchtop cells. Single station automation where a feeder, fixture and output tray sit close together.
  • Machine modules. Built into compact equipment for handling and sorting.
  • Gluing. Dispensing adhesive on small parts and housings.
  • Battery and solar handling. Moving small cells and components between close stations.

Browse more options in our factory robots and industrial robots ranges.

Which Should You Buy?

ModelMax payloadReachBest for
SIASUN SA7A-7/0.507 kg500 mmDesk sized cells and machine modules
SIASUN SA7A-7/0.607 kg600 mmTest, inspection and compact assembly
SIASUN SA7A-7/0.707 kg700 mmFast assembly over a wider area
SIASUN SA4A-4/0.404 kg400 mmLighter parts in an even smaller cell
SIASUN SA10A-10/0.6010 kg600 mmHeavier grippers in a compact cell

See all SIASUN SCARA robots and SIASUN industrial robots.

Before You Buy

  • Use the rated load for cycle time. 7 kg is the maximum and 3 kg the rated load. Check gripper plus part weight and J4 inertia.
  • Measure the cell. Confirm every point lies within 500 mm, the joint limits and the 200 mm J3 stroke.
  • Plan the mounting. Use a stiff, anchored base even for a light robot.
  • Check the environment. IP20 suits clean, dry indoor areas.
  • Confirm integration. Check PLC, feeder and vision communication, tool cabling and guarding.

Pricing and Availability

The SIASUN SA7A-7/0.50 is supplied on a quotation basis. The final cost depends on controller options, cable length, tooling, shipping and integration. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your location.

Frequently Asked Questions

What is the payload of the SIASUN SA7A-7/0.50?

The maximum payload is 7 kg. Published datasheet listings give a rated payload of 3 kg.

How far can it reach?

The combined J1 and J2 reach is 500 mm, the most compact in the SA7A line.

How precise is it?

Repeatability is ±0.02 mm horizontally, ±0.01 mm vertically and ±0.01° in rotation.

How much does it weigh?

About 19 kg according to published datasheet listings. Confirm with your quote.

Should I choose it or the SA4A-4/0.40?

Choose the SA7A-7/0.50 when you need more payload and reach; choose the SA4A for very light parts in the smallest cells.

Can it work in dusty or wet areas?

It is rated IP20 for clean indoor use. Ask about options for harsher conditions.

Where can I buy the SIASUN SA7A-7/0.50?

You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.

Summary

The SIASUN SA7A-7/0.50 is the compact member of the SA7A family: 7 kg maximum payload, 500 mm reach, ±0.02 mm repeatability, about 19 kg of robot and a stiff double supported arm. It suits desk sized assembly cells, machine modules and small part handling. Request a quote on this page to check it against your application.

المواصفات

General

ماركة SIASUN
نموذج SA7A-7/0.50
الجزء # SA7A-7/0.50
استخدام الروبوت صناعية

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: SIASUN SA7A-7/0.50
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.