SIASUN SR25A-35/1.80
متوفر
- ماركة:
- SIASUN
- نموذج:
- SR25A-35/1.80
- الجزء #:
- SR25A-35/1.80
- ORIGIN:
- الصين
- Warranty:
- 12 MONTHS
- AVAILABILITY:
- FOR OPPORTUNITIES OVER 1 MILLION USD
- SKU:
- SIASUN-SR25A-35-1-80
SIASUN SR25A-35/1.80
On a welding or cutting robot, the trouble usually starts at the wrist. Torch cables, gas hoses and wire liners wrap around the outside of the arm, snag on fixtures, wear through and limit how far the tool can turn. The SIASUN SR25A-35/1.80 is designed to avoid that. Its wrist axes are hollow, so process lines run through the arm instead of around it, and it pairs that clean layout with a 35 kg payload, a 1803 mm reach and ±0.05 mm repeatability.
Background
SIASUN is a Chinese robotics manufacturer with an industrial line that covers SCARA robots, six axis arms from small to ultra high payload, collaborative robots and mobile robots. The SR25A series is its compact six axis platform. SIASUN describes the SR25A-35/1.80 as an upgraded iteration of its 20 kg class robot, with a higher payload and a redesigned J4 to J6 wrist that widens the range of applications. The model name gives the series, payload in kilograms and reach in meters. A SR25A-25/1.80 with the same reach and 25 kg payload is also available.
Key Specifications
| Specification | SIASUN SR25A-35/1.80 |
|---|---|
| Robot type | Six axis articulated industrial robot |
| Payload | 35 kg |
| Reach | 1803 mm |
| Repeatability | ±0.05 mm |
| Degrees of freedom | 6 |
| Wrist protection | IP65 |
| J5 and J6 range | ±180° |
| Wrist design | Hollow J4 to J6 with internal cable routing |
| Typical applications | Welding, cutting, handling, assembly, grinding and polishing, loading and unloading |
Arm weight, J1 to J4 ranges and joint speeds should be confirmed on the current datasheet for your process.
Features
Hollow Wrist and Arm
The J4 to J6 axes follow a hollow design, and cables run inside the arm. Torch packages, hoses and sensor lines pass through the wrist, so they do not wrap around the outside, rub against parts or catch on fixtures. This also makes offline programming more reliable, because the dress pack moves predictably with the arm.
Wide Wrist Rotation
J5 and J6 each turn ±180°, giving the tool freedom to reach around corners, into box sections and along curved seams without repositioning the part.
Light, Fast and Precise
The body is cast from lightweight aluminum alloy, which reduces moving mass for quick acceleration and stops. SIASUN designed the arm for high speed motion while holding ±0.05 mm repeatability.
Ready for Welding
An integrated wire feeder mount and a built in cable management system simplify setup for arc welding, so the feeder, liner and torch cable sit in a tidy, repeatable position on the arm.
Quick Recalibration
Each joint carries a zero position calibration groove. After maintenance or a collision, technicians can return the axes to their reference positions quickly, which shortens downtime.
Applications
- Arc welding. MIG, MAG and TIG welding of frames, brackets and structures, with torch cables routed through the hollow wrist. See our welding robots.
- Cutting. Plasma, laser or mechanical cutting along 3D contours.
- Material handling. Moving parts and packs up to 35 kg including the gripper.
- Machine loading and unloading. Tending CNC machines, presses and molding machines.
- Assembly. Placing medium weight components in automotive, appliance and electronics production.
- Grinding and polishing. Deburring and finishing. SIASUN also offers a grinding and polishing system built on its SR25A and SR12A arms.
More options are in our factory robots and industrial robots ranges.
Which Should You Buy?
| Model | Payload | Reach | Best for |
|---|---|---|---|
| SIASUN SR25A-35/1.80 | 35 kg | 1803 mm | Welding and handling with heavier tools |
| SIASUN SR25A-25/1.80 | 25 kg | 1.80 m class | Same reach when the tool is lighter |
| SIASUN SR25A-12/2.01 | 12 kg | 2.01 m class | Longer reach with light torches or grippers |
| SIASUN SR12A-12/1.46 | 12 kg | 1465 mm | Compact cells and lighter work |
| SIASUN SR50A-50/2.15 | 50 kg | 2158 mm | More payload and reach for larger cells |
See the full lineup in SIASUN small and medium payload robots and all SIASUN industrial robots.
Before You Buy
- Add up the tool load. Include torch or gripper, cables, wire feeder if mounted on the arm, and the part. Check the load center and wrist inertia against the load diagram.
- Check the hollow wrist bore. Confirm that your torch package or hose bundle fits through the wrist.
- Map the reach. Make sure every weld seam or pick point sits inside the 1803 mm envelope with the right tool angle.
- Plan the process equipment. For welding, choose the power source, feeder and torch, and confirm the controller interface. Add positioners or a track if parts are large.
- Protect the cell. The wrist is IP65. Plan fume extraction, spatter protection, guarding and a risk assessment.
Pricing and Availability
The SIASUN SR25A-35/1.80 is supplied on a quotation basis. The final cost depends on controller options, cables, process equipment, shipping and any integration work. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your location.
Frequently Asked Questions
What is the payload of the SIASUN SR25A-35/1.80?
35 kg at the wrist, including the tool and the part.
How far can it reach?
The maximum reach is 1803 mm.
How accurate is it?
Repeatability is ±0.05 mm.
What does the hollow wrist do?
The J4 to J6 axes are hollow, so torch cables, hoses and signal lines run through the arm instead of around it. This prevents interference and simplifies the cell layout.
Is it suitable for arc welding?
Yes. Welding is a listed application, and the hollow wrist, integrated wire feeder mount and cable management system are designed for it.
What is the difference between the SR25A-35/1.80 and the SR25A-25/1.80?
They share the same reach class. The 35 kg model handles heavier tools and parts, while the 25 kg model suits lighter work.
Where can I buy the SIASUN SR25A-35/1.80?
You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.
Summary
The SIASUN SR25A-35/1.80 combines a 35 kg payload and 1803 mm reach with a hollow wrist that keeps process lines inside the arm. With ±0.05 mm repeatability, ±180° wrist rotation, a light aluminum body, a wire feeder mount and joint calibration grooves, it is well suited to welding, cutting, handling and finishing. Request a quote on this page to check it against your application.