SIASUN SR360A-280/3.20

The SIASUN SR360A-280/3.20 is the long reach member of the SR360A series: a six axis industrial robot that carries 280 kg across a 3200 mm working radius. A backlash free J5 reducer, in-house high torque motors and a counterweight free arm make it a strong fit for spot welding large assemblies, heavy handling and machine loading in wide cells.

متوفر

ماركة:
SIASUN
نموذج:
SR360A-280/3.20
الجزء #:
SR360A-280/3.20
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-SR360A-280-3-20

SIASUN SR360A-280/3.20

In heavy automation, reach is often the harder number to find. Plenty of robots can lift 280 kg, but far fewer can hold that load more than three meters from their base, which is what it takes to weld across a full car body side, serve two fixtures from one position or reach deep into a large press or machining center. The SIASUN SR360A-280/3.20 was configured for exactly that job. It pairs a 280 kg payload with a 3200 mm reach, the longest in its series, so one robot can cover a working area that would otherwise need a track or a second arm.

Background

SIASUN is a Chinese robotics manufacturer with an industrial line that runs from compact SCARA and small payload arms up to heavy six axis robots used in automotive, machinery and logistics plants. The SR360A series belongs to its large payload range. SIASUN names each model by series, payload in kilograms and reach in meters, so the SR360A-280/3.20 is the SR360A platform rated for 280 kg at 3.20 m. Its sibling, the SR360A-360/2.83, takes the opposite trade: more payload over a shorter reach.

Key Specifications

SpecificationSIASUN SR360A-280/3.20
Robot typeSix axis articulated industrial robot
Payload280 kg
Reach3200 mm
Degrees of freedom6
Wrist protectionIP67
Arm designCounterweight free, backlash free J5 reducer
Typical applicationsSpot welding, handling, assembly, gluing, loading and unloading

Repeatability, arm weight, axis ranges and joint speeds should be confirmed on the current datasheet before you design your cell.

Features

Stiffness at Full Extension

A long arm magnifies every bit of play in the drivetrain, and the effect is greatest at the wrist. SIASUN fits the J5 wrist axis with a backlash free reducer, which raises the overall rigidity of the arm and cuts the vibration that appears when a heavy tool starts and stops. Less settling time at each point means steadier weld placement and shorter cycles.

High Torque Motors for Faster Welding

The robot uses high speed, high torque motors developed by SIASUN itself. According to the manufacturer, they raise spot welding rhythm by more than 10% compared with its earlier designs. On a line with hundreds of welds per body, small gains at each point add up across a shift.

Counterweight Free Arm

Many heavy robots balance the upper arm with a counterweight or spring unit. The SR360A drops it. Fewer fast moving parts means fewer wear points and a lower chance of failure, and the arm has a more compact profile behind the base, which helps when robots are packed close together on a welding line.

Sealed Wrist and Ready Controller

The IP67 wrist is protected against dust and temporary immersion, which matters around weld spatter, coolant and washdown. The control cabinet supports mainstream industrial communication protocols and has space reserved for an external axis driver, so a track, positioner or servo gun axis can be added without a second cabinet.

Applications

  • Automotive spot welding. Large body side, floor and frame assemblies where the gun must travel far from the robot base. See our welding robots for related options.
  • Heavy material handling. Moving castings, stampings, engine parts and fixtures between stations up to 280 kg including the gripper.
  • Machine loading and unloading. Serving presses, machining centers and injection molding machines, where the long reach lets the robot stand outside the machine guard.
  • Assembly. Placing large components such as doors, seats or subframes onto a moving or fixed assembly.
  • Gluing and sealing. Running long bead paths on large panels without repositioning the part.

For more ideas across the plant, browse our factory robots range.

Which Should You Buy?

ModelPayloadReachBest for
SIASUN SR360A-280/3.20280 kg3200 mmHeavy tools over a very large working area
SIASUN SR360A-360/2.83360 kg2830 mmThe heaviest loads where reach is less critical
SIASUN SR270A-220/3.21220 kg3210 mmSimilar reach with a lighter tool
SIASUN SR270A-270/2.70270 kg2700 mmNear equal payload in a tighter cell
SIASUN SR220A-125/3.10125 kg3100 mmLong reach with mid weight tooling

If your load is above 360 kg, look at our SIASUN ultra high payload robots. The full brand range is in SIASUN industrial robots.

Before You Buy

  • Calculate the real payload. Add the tool, gripper or weld gun, cables, dress pack and the heaviest part. Check the load center and wrist inertia against the robot's load diagram, not only the 280 kg figure.
  • Map the reach. 3200 mm is the maximum radius. Confirm that every target point, including tool orientation, sits inside the working envelope.
  • Confirm accuracy needs. Ask for the current datasheet value for repeatability and compare it with your weld or assembly tolerance.
  • Plan the foundation. A long reach heavy robot needs a rigid floor mount and anchoring that can handle its dynamic forces.
  • Check integration. Confirm the controller protocol matches your PLC, and whether you need external axes for a track, positioner or servo gun.
  • Plan safety. Fencing, light curtains and a risk assessment are required for a robot of this size.

Pricing and Availability

The SIASUN SR360A-280/3.20 is supplied on a quotation basis, because the final cost depends on the controller options, dress pack, external axes, shipping and any integration work. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your location.

Frequently Asked Questions

What is the payload of the SIASUN SR360A-280/3.20?

It is rated for 280 kg at the wrist. This figure includes the tool and the part, so subtract your gripper or weld gun weight to find the usable part weight.

How far can it reach?

The maximum reach is 3200 mm, the longest in the SR360A series.

What is the difference between the SR360A-280/3.20 and the SR360A-360/2.83?

They share the same platform. The SR360A-280/3.20 gives up 80 kg of payload in exchange for about 370 mm more reach. Choose by whichever limit your cell hits first.

Is it suitable for spot welding?

Yes. Spot welding is one of its main applications, and SIASUN states that its high torque motors increase spot welding rhythm by more than 10%.

What is its repeatability?

Please confirm the repeatability on the current datasheet when you request a quote, so it can be checked against your process tolerance.

Can it be used in dirty or wet environments?

The wrist is rated IP67. Protection of the rest of the arm and the controller should be confirmed for harsh conditions.

Where can I buy the SIASUN SR360A-280/3.20?

You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.

Summary

The SIASUN SR360A-280/3.20 is the choice when a heavy tool has to travel far. With 280 kg of payload, 3200 mm of reach, a stiff backlash free wrist, high torque motors and a counterweight free arm, it is built for large spot welding, handling and loading cells where one robot needs to cover more ground. Request a quote on this page to check it against your application.

المواصفات

General

ماركة SIASUN
نموذج SR360A-280/3.20
الجزء # SR360A-280/3.20
نوع الروبوت الروبوتات المتنقلة المستقلة (AMRS)
استخدام الروبوت صناعية

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: SIASUN SR360A-280/3.20
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.