SIASUN SR50A-70/2.15
متوفر
- ماركة:
- SIASUN
- نموذج:
- SR50A-70/2.15
- الجزء #:
- SR50A-70/2.15
- ORIGIN:
- الصين
- Warranty:
- 12 MONTHS
- AVAILABILITY:
- FOR OPPORTUNITIES OVER 1 MILLION USD
- SKU:
- SIASUN-SR50A-70-2-15
SIASUN SR50A-70/2.15
Between the light arms that handle small parts and the heavy robots built for car bodies sits a large share of real factory work: castings to deburr, blanks to load into a lathe, boxes and fixtures to move between stations, grinding heads that push back against the part. These jobs need a robot that can carry a substantial tool, reach across a full machine and still place it accurately. The SIASUN SR50A-70/2.15 is designed for that middle ground, with a 70 kg payload, a 2158 mm reach and ±0.05 mm repeatability.
Background
SIASUN is a Chinese robotics manufacturer with an industrial line that spans SCARA robots, six axis arms from small to ultra high payload, collaborative robots and mobile robots. The SR50A series is its medium payload six axis platform, built around high rigidity, high inertia capacity and efficient transmission. SIASUN names each model by series, payload in kilograms and reach in meters. The SR50A-70/2.15 is the 70 kg version of the platform, while the SR50A-50/2.15 offers the same reach class at 50 kg.
Key Specifications
| Specification | SIASUN SR50A-70/2.15 |
|---|---|
| Robot type | Six axis articulated industrial robot |
| Payload | 70 kg |
| Reach | 2158 mm |
| Repeatability | ±0.05 mm |
| Degrees of freedom | 6 |
| Wrist protection | IP65 |
| Typical applications | Handling, grinding and polishing, cutting, assembly, loading and unloading |
Arm weight, axis ranges and joint speeds should be confirmed on the current datasheet for your process.
Features
Faster Cycles
A high rigidity transmission combined with a variable acceleration algorithm lets each axis move faster than SIASUN's previous generation. The manufacturer states an efficiency gain of about 20%, which matters most in repetitive handling and machine loading where cycle time sets output.
Protected J6 with Internal Spiral Cable
The J6 motor is fully enclosed, and the robot's own cabling runs as an integrated spiral inside the wrist. This keeps internal wiring apart from the cables and hoses you add for your gripper or spindle, so they do not rub, tangle or interfere as the wrist rotates. With an IP65 rated wrist, the arm is protected against dust and water jets, which helps in grinding, cutting and coolant splash areas.
Lighter Arm
SIASUN reports that the body is about 10% lighter than the previous generation. A lighter arm carries less of its own mass, which supports quicker acceleration and puts less load on the mounting.
Precise 3D Motion
An integrated precision servo drive and control system keeps motion stable at high speed. The robot can follow complex three dimensional paths around parts of different shapes and sizes, which is what grinding, polishing and cutting demand.
Applications
- Material handling. Moving parts, fixtures and packed goods up to 70 kg including the gripper, between conveyors, racks and workstations.
- Grinding and polishing. Deburring castings and finishing surfaces with a spindle or belt grinder. SIASUN also offers a grinding and polishing system built on its smaller arms.
- Cutting. Trimming and cutting along 3D contours with a cutting head.
- Machine loading and unloading. Tending lathes, machining centers and presses, where the 2158 mm reach lets one robot serve more than one machine.
- Assembly. Placing medium weight components into fixtures and subassemblies.
Explore more options in our factory robots and industrial robots ranges.
Which Should You Buy?
| Model | Payload | Reach | Best for |
|---|---|---|---|
| SIASUN SR50A-70/2.15 | 70 kg | 2158 mm | Heavier grippers and spindles across a large cell |
| SIASUN SR50A-50/2.15 | 50 kg | 2.15 m class | Same reach class when the tool is lighter |
| SIASUN SR25A-35/1.80 | 35 kg | 1.80 m class | Medium tools in a more compact cell |
| SIASUN SR25A-12/2.01 | 12 kg | 2.01 m class | Long reach with light tooling |
| SIASUN SR220A-125/3.10 | 125 kg | 3.10 m class | When 70 kg is not enough |
See the full lineup in SIASUN small and medium payload robots, large payload robots and all SIASUN industrial robots.
Before You Buy
- Calculate the full payload. Add the gripper or spindle, tool changer, cables and the heaviest part, and check the load center and wrist inertia against the load diagram.
- Allow for process forces. Grinding and polishing push back on the tool. Leave margin below 70 kg and consider force control for consistent finish.
- Map the reach. Confirm every point, including tool angle, sits inside the 2158 mm envelope.
- Check the environment. The wrist is IP65. Ask about protection for the rest of the arm if there is heavy dust or coolant.
- Confirm integration. Check controller communication with your PLC, vision or force sensors, and plan guarding and safety.
Pricing and Availability
The SIASUN SR50A-70/2.15 is supplied on a quotation basis. The final cost depends on controller options, cables, tooling, shipping and any integration work. Request a quote from this page and our team will confirm the price, lead time, warranty and support for your location.
Frequently Asked Questions
What is the payload of the SIASUN SR50A-70/2.15?
70 kg at the wrist, including the tool and the part.
How far can it reach?
The maximum reach is 2158 mm.
How accurate is it?
Repeatability is ±0.05 mm.
Is it suitable for grinding and polishing?
Yes. Grinding and polishing are listed applications, and the protected J6 with internal cabling and the IP65 wrist suit dusty finishing cells.
What is the difference between the SR50A-70/2.15 and the SR50A-50/2.15?
Both belong to the same series and reach class. The 70 kg model handles heavier tools and parts; the 50 kg model suits lighter work.
How much faster is it than earlier SIASUN models?
SIASUN states an efficiency gain of about 20% over the previous generation, from its stiffer transmission and variable acceleration control.
Where can I buy the SIASUN SR50A-70/2.15?
You can request a quote directly on this page. Our team will confirm pricing, lead time and delivery for your region.
Summary
The SIASUN SR50A-70/2.15 is a medium payload workhorse: 70 kg, 2158 mm of reach, ±0.05 mm repeatability, a protected J6 with internal cabling and a lighter, faster arm. It fits handling, finishing, cutting and machine loading cells that need more than a small robot but less than a heavy one. Request a quote on this page to check it against your application.